Cara Membuat Arc di AutoCAD

Metode Arc

Cara Membuat Arc di AutoCAD - Perintah Arc berfungsi untuk membuat objek busur, cara membuat Arc atau garis busur di AUtoCAD dapat dilakukan dengan beberapa metode.

·        Angle (A)   : Dengan sudut

·        Center Point (C)  : Titik pusat

·        Direction (D)  : Arah mulai

·        EndPoint (E)  : Titik akhir

·        Lenght of chord (L) : Panjang tali busur

·        Radius (R)  : Dengan menentukan jari-jari

Untuk mengaktifkan perintah Arc - klik ikon Arc di Toolbar Draw atau Ketik Arc pada command line. Seperti terlihat pada gambar dibawah ini ada beberapa metode Membuat Arc di AutoCAD.

Metode A

·         3-Point

·         Start-center-end

·         Start-center-angle

·         Start-center-length

·         Start-end-angle

·         Start-end-direction

·         Start-end-radius

·         Center-start-end

·         Center-start-angle

·         Center-start-length

·         Continue

Untuk Cara Membuat Arc atau garis busur dalam gambar 2D dengan metode-metode diatas kita akan bahas satu persatu.

3 POINT

Arc 3 Point

Klik Ikon Arc-3POINT

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: Klik Point 2

Specify end point of arc: Klik Point 3

START-CENTER-END

Arc Start center end

Klik Ikon Arc-START-CENTER-END

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _c Specify center point of arc: Klik Point 2

Specify end point of arc or [Angle/chord Length]: Klik Point 3

START-CENTER-ANGLE

arc start center angle

Klik Ikon Arc-START-CENTER-ANGLE

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _c Specify center point of arc: Klik Point 2

Specify end point of arc or [Angle/chord Length]: _a Specify included angle: 90

START-CENTER-LENGTH

Arc start center length

Klik Ikon Arc-START-CENTER-LENGTH

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _c Specify center point of arc: Klik Point 2

Specify end point of arc or [Angle/chord Length]: _l Specify length of chord: 707.11

START-END-ANGLE

arc start end angle

Klik Ikon Arc-START-END-ANGLE

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _e

Specify end point of arc: Klik Point 2

Specify center point of arc or [Angle/Direction/Radius]: _a Specify included angle: 90

START-END-DIRECTION

arc start end direction

Klik Ikon Arc-START-END-DIRECTION

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _e

Specify end point of arc: Klik Point 2

Specify center point of arc or [Angle/Direction/Radius]: _d Specify tangent direction for the start point of arc: klik ke arah atas

START-END-RADIUS

arc start end radius

Klik Ikon Arc-START-END-RADIUS

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _e

Specify end point of arc: Klik Point 2

Specify center point of arc or [Angle/Direction/Radius]: _r Specify radius of arc: 500

CENTER-START-END

arc center start end

Klik Ikon Arc-CENTER-START-END

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: _c Specify center point of arc: Klik Point 1

Specify start point of arc: Klik Point 2

Specify end point of arc or [Angle/chord Length]: Klik Point 3

CENTER-START-ANGLE

arc center start angle

Klik Ikon Arc-CENTER-START-ANGLE

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: _c Specify center point of arc: Klik Point 1

Specify start point of arc: Klik Point 2

Specify end point of arc or [Angle/chord Length]: _a Specify included angle: 90

CENTER-START-LENGTH

arc center start length

Klik Ikon Arc-CENTER-START-LENGTH

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: _c Specify center point of arc: Klik Point 1

Specify start point of arc: Klik Point 2

Specify end point of arc or [Angle/chord Length]: _l Specify length of chord: 707.11

CONTINUE

arc continue

START-END-ANGLE

Klik Ikon Arc-START-END-ANGLE

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]: Klik Point 1

Specify second point of arc or [Center/End]: _e

Specify end point of arc: Klik Point 2

Specify center point of arc or [Angle/Direction/Radius]: _a Specify included angle: 180

Klik Ikon Arc-CONTINUE

Command: _arc

Arc creation direction: Counter-clockwise (hold Ctrl to switch direction).

Specify start point of arc or [Center]:

Specify end point of arc: Klik Point 3

Sekian Pembahasan Cara Membuat Arc di AutoCAD dalam beberapa metode, semoga mudah dipahami, Selamat mencoba dan berkreasi.